Guide6.1
Capsule polisher
Removes powder and dust from filled capsules and improves appearance before bottling.
- 1Confirm the polisher is clean, dry and labelled CLEAN.
- 2Inspect the brush, screen, discharge chute and dust container.
- 3Confirm dust extraction is connected and working.
- 4Connect the encapsulator discharge to the polisher inlet; place a labelled container at the outlet.
- 5Switch on and check smooth operation.
- 6Feed capsules slowly and evenly.
- 7Check powder is removed; inspect for cracks, dents, scratches or loose caps and remove defects.
- 8Monitor vibration, noise and vacuum; record checks in the BMR.
- 9After production, let all capsules discharge, switch off, clean and dry all parts and apply the CLEAN label.
Did this solve the problem?