Problem & answerC-06
Low Yield or Reconciliation Discrepancy
Likely causes
- Losses during dispensing, sieving or discharge
- Powder retained in equipment
- Dust extraction losses
- Spillage
- Weighing or recording error
- Quality rejects
How to fix it
- 1Recheck all recorded weights and calculations.
- 2Check equipment for retained powder.
- 3Account for samples, rejects and waste.
- 4If yield is outside limits, notify QA and raise a deviation.
It is fixed when
Yield and reconciliation within BMR limits, or an approved deviation.
Stop it coming back
- Weigh and record every drum, sample and waste.
Did this solve the problem?