Problem & answerG-02
Machine Stops Suddenly During Operation
Likely causes
- Powder run out or powder outlet blocked
- Loose or damaged mechanical part
- Motor overload
- Clutch friction disc loose (on clutch-driven machines)
- Automatic pause triggered by low capsule or powder level
How to fix it
- 1Check the HMI for an alarm or pause message.
- 2Add powder if empty and clear the powder outlet.
- 3Check the machine for loose or damaged parts.
- 4If the motor overloaded, find the cause and repair or adjust (see G-05).
- 5On clutch-driven machines, check for a loose friction disc in the clutch.
It is fixed when
Machine runs a full cycle without stopping.
Stop it coming back
- Keep hoppers topped up and investigate every unplanned stop.
Did this solve the problem?