Problem & answerB-10
Tamping Pins Sticking
Likely causes
- Powder build-up
- Lack of lubrication
- Worn or bent pins
- Incorrect adjustment
How to fix it
- 1Stop and isolate the machine.
- 2Remove the tamping pins and clean each pin thoroughly.
- 3Inspect for wear or bending; replace damaged pins.
- 4Lubricate as specified in the maintenance schedule.
- 5Reassemble and carry out a functional test.
It is fixed when
Pins move freely and capsule weights remain consistent.
Stop it coming back
- Inspect and clean tamping pins after every batch.
Did this solve the problem?