Guide4.6
Conveyor speeds along the line
| Conveyor | Reference speed | Note |
|---|---|---|
| Unscrambler infeed | 30 Hz | |
| Counter conveyor | 22 Hz | Slower for accurate filling. |
| Bottle / desiccant feeder conveyor | 25 Hz | Both conveyors at the desiccant feeder set to match. |
| Capper conveyor | 40 Hz | Matched to bottle holder speed (38 Hz). |
| Induction sealer conveyor | 40 Hz | Sets time under the sealing head. |
Rule: at every transfer, the downstream conveyor runs at the same speed or slightly faster (about 5–10%). A slower downstream conveyor makes bottles pile up; a much faster one tips them over. Hz values are inverter frequencies: the same Hz on different conveyors does not always mean the same belt speed, so always confirm by watching the transfer.
Power and speed work togetherFaster conveyor = less time under the head = less heat. If you change conveyor speed, re-check seal quality. Increase power or reduce speed in small steps.
Did this solve the problem?