Guide9.1

Digital bench scale operation

1Place the scale on a stable, level surface away from drafts and vibration.
2Check the calibration label is current.
3Make sure the platform is clean and empty.
4Switch on and wait for the display to stabilise at zero (allow the warm-up time in the SOP).
5Place the empty container on the platform and press TARE/ZERO.
6Add the material and let the reading stabilise.
7Read and record the weight.
8Use UNIT to change units and PCS mode only for counting identical items, where applicable.
9Remove the material, clean the platform and switch off after use.

Calibration buttonUse the CAL function only with the correct certified calibration weight and only as the calibration procedure allows. Unauthorised calibration invalidates the scale.

Did this solve the problem?