Problem & answerI-03
Foil Burnt, Scorched or Cap Deformed
Likely causes
- Power too high
- Conveyor too slow or stopped under the head
- Head too low
How to fix it
- 1Stop and remove affected bottles.
- 2Reduce power or increase conveyor speed.
- 3Raise the head with the handwheel to the correct gap.
- 4Never let bottles stand under an energised head.
Photos
It is fixed when
No discolouration or cap distortion.
Stop it coming back
- Enable the stop-sensor interlock so the head de-energises when the conveyor stops.
Did this solve the problem?