Skip to content

Machines Problems Guides Ingredients

Machines Problems Guides Ingredients

Search real manufacturing machine problems and get clear, step-by-step answers: causes, fixes, checks and prevention for capsule filling, blending, bottling and more.

Explore

Machines
Problems
Guides
Ingredients

Good to know

Answers here are general guidance. Always follow your own site procedures, the machine manual and your safety rules — isolate and lock out before working on any machine.

© 2026 Dhanushka Kariyawasam. All rights reserved.

Fuse Blown — Capsule Filling · Ask Dhanu

Machines Capsule Filling Electrical, PLC, Sensors & Safety Alarms

Problem & answerH-03

Fuse Blown

Likely causes

Short circuit
Motor overload
Electrical fault

How to fix it

1Isolate power.
2Identify the root cause.
3Replace the fuse with the correct rating.
4Restart the machine.

It is fixed when

Fuse remains intact during operation.

Stop it coming back

Never fit a fuse of the wrong rating.

Did this solve the problem?

Points to inspect

Fuse
Wiring
Motor

More in Electrical, PLC, Sensors & Safety Alarms

H-01Power Failure
H-02Circuit Breaker Tripped
H-04Emergency Stop Activated
H-05Safety Door Open Alarm
H-06PLC Alarm Active
H-07Automatic Pause Keeps Triggering
H-08PLC Input Signal Failure
H-09PLC Output Failure

H-10PLC Communication Error

H-11HMI Screen Not Responding

H-12Photoelectric Sensor Failure

H-13Proximity Sensor Failure

H-14Encoder Failure

H-15Inverter (VFD) Fault

H-16Loose Electrical Connection

H-17Control Panel Overheating

H-18Ground Fault Detected

General guidance only. Follow your site procedures and the machine manual, and isolate the machine before any work on it.