Skip to content

Machines Problems Guides Ingredients

Machines Problems Guides Ingredients

Search real manufacturing machine problems and get clear, step-by-step answers: causes, fixes, checks and prevention for capsule filling, blending, bottling and more.

Explore

Machines
Problems
Guides
Ingredients

Good to know

Answers here are general guidance. Always follow your own site procedures, the machine manual and your safety rules — isolate and lock out before working on any machine.

© 2026 Dhanushka Kariyawasam. All rights reserved.

Inverter (VFD) Fault — Capsule Filling · Ask Dhanu

Machines Capsule Filling Electrical, PLC, Sensors & Safety Alarms

Problem & answerH-15

Inverter (VFD) Fault

Likely causes

Over-voltage or under-voltage
Motor overload
Overheating

How to fix it

1Read the inverter error code.
2Check supply voltage.
3Verify motor load.
4Inspect the cooling fan and ventilation.
5Reset the inverter after correcting the fault.

It is fixed when

Drive runs without fault alarms during production.

Stop it coming back

Keep the electrical cabinet clean and well ventilated.

Did this solve the problem?

Points to inspect

Inverter
Cooling fan
Motor
Supply

More in Electrical, PLC, Sensors & Safety Alarms

H-01Power Failure
H-02Circuit Breaker Tripped
H-03Fuse Blown
H-04Emergency Stop Activated
H-05Safety Door Open Alarm
H-06PLC Alarm Active
H-07Automatic Pause Keeps Triggering
H-08PLC Input Signal Failure

H-09PLC Output Failure

H-10PLC Communication Error

H-11HMI Screen Not Responding

H-12Photoelectric Sensor Failure

H-13Proximity Sensor Failure

H-14Encoder Failure

H-16Loose Electrical Connection

H-17Control Panel Overheating

H-18Ground Fault Detected

General guidance only. Follow your site procedures and the machine manual, and isolate the machine before any work on it.