Problem & answerF-03
Vacuum Filter Blocked
Likely causes
- Powder accumulation or capsule dust
- Excessive product fines
- Filter not cleaned
How to fix it
- 1Stop the machine and isolate power.
- 2Unscrew the filter housing cap and remove the filter element.
- 3Inspect for powder, dust or damage.
- 4Clean a reusable element with compressed air, or replace it if heavily contaminated or damaged.
- 5Clean inside the filter housing.
- 6Refit the element and tighten the cap securely.
- 7Check hoses and fittings for leaks.
- 8Start the pump and confirm normal vacuum and airflow.
It is fixed when
Vacuum restored and stable during production.
Stop it coming back
- Clean the filter after every shift (daily minimum); inspect it weekly, more often with fine powders.
- Check pump oil level and change to schedule.
Did this solve the problem?