Problem & answerF-04
Bottle Jam Alarm on the Conveyor
Likely causes
- Damaged or deformed bottle
- Downstream machine stopped
- Jam time or delay setting too short
- Guide rails too tight
- Accumulation sensor dirty
How to fix it
- 1Stop the line and remove the jammed and damaged bottles.
- 2Check why the downstream machine stopped and clear that fault first.
- 3Check guide rail width.
- 4Clean the jam / accumulation sensor.
- 5Confirm jam time and delays match the reference settings.
- 6Reset and restart.
It is fixed when
Line runs without repeat jam alarms.
Stop it coming back
- Inspect bottles at loading; reject deformed bottles.
Did this solve the problem?