Problem & answerF-02
Bottles Falling Over or Not Upright
Likely causes
- Bottle blow time or blow delay incorrect
- Conveyor speed mismatch between sections
- Guide rails too wide
- Transfer plates misaligned or worn
- Light or unstable bottles
How to fix it
- 1Stop and remove fallen bottles.
- 2Check the air-blow time and delay against the reference settings.
- 3Match conveyor speeds across each transfer.
- 4Close the guide rails to the bottle diameter.
- 5Align or replace transfer (dead) plates.
- 6Run a production test.
It is fixed when
Bottles stay upright through every transfer.
Stop it coming back
- Check transfers at every changeover.
Did this solve the problem?