Guide6.7
Closing pin sizing
Typical closing pin sizing for 16-bore segment machines. Each pin diameter uses its own guide plate; check the manufacturer’s part chart before changing sizes.
| Closing pin diameter | Capsule sizes |
|---|---|
| 4.0 mm | 2 – 5 |
| 4.5 mm | 2 – 4 |
| 5.0 mm | 0 – 1 |
| 5.5 mm | 00 – 0 |
| 6.0 mm | 00 – 0 |
| 6.5 mm | 00 |
Did this solve the problem?