Guide6.8
Wear parts and recommended spares
| Part | Why it wears or fails | Stock |
|---|---|---|
| Rubber suction nozzles | Most frequently replaced part; wear with every vacuum cycle. | Essential |
| Capsule holding pins / rings | Damaged in jams, cleaning or mishandling. Size-specific. | Essential |
| Tamping pins and springs | Pins wear with abrasive or caustic product or a hard stop; springs lose tension, affecting weight and jam protection. | Essential |
| Dosing discs | Cavities wear with abrasive powders. One per capsule size. | Essential |
| Dosing disc wear / sealing ring | Wears from constant rotation; causes powder leakage. | Essential |
| Powder scraper (wiper) blade | Wears in contact with the dosing disc. | Essential |
| Seals and gaskets (vacuum and shaft) | Wear allows vacuum loss and powder ingress into bearings. | Essential |
| Segment plastic inserts | Wear over time and leak fine powder. | Recommended |
| Spacing washer | Calibrates tamping pins; easily lost during strip-down. | Recommended |
| Ejection pins, springs and guide plate | Bend during cleaning or maintenance. | Recommended |
| Separation pins and holder plate | Wear at the separation station. | Recommended |
| Powder ring plate, tamper guide plate, tamping pin holder | Wear in the dosing station. | Recommended |
Did this solve the problem?