Guide5.6
Vibrating screen operation
- 1Confirm the machine is clean and the correct mesh screen is installed.
- 2Confirm all clamps are tight.
- 3Place a collection container under the outlet.
- 4Switch on the power.
- 5Feed powder gradually into the centre of the screen; do not overload (keep within the manufacturer’s limit, e.g. below 3 kg).
- 6Watch that powder passes evenly; if screening slows, reduce the feed rate and check for blinding.
- 7Stop the machine when screening is complete.
- 8Remove and clean the screen, frame and collection area; inspect the screen for damage before storage.
Did this solve the problem?