Problem & answerA-13
Missing Capsule Body or Cap
Likely causes
- Poor separation
- Low vacuum or vacuum failure
- Incorrect separator adjustment or timing
- Defective or damaged capsules
How to fix it
- 1Check vacuum pressure.
- 2Inspect and clean the separation station.
- 3Check separator alignment and adjust timing.
- 4Remove defective capsules.
- 5Replace damaged separation parts.
- 6Test separation.
It is fixed when
No missing bodies or caps in a 100-capsule sample.
Stop it coming back
- Verify vacuum before every batch.
Did this solve the problem?